The cooling tower is not filled with something that needs to be cooled into the tower, but the waste heat generated in the industry needs to go through the cooling water in the cooling tower. The filler acts as a catalyst in the cooling tower, increasing heat dissipation and extending the residence time of the cooling water. A cooling tower is a device that cools the hot fluid to a reasonable temperature.
Cooling tower wide range of applications, including air conditioning cooling industry, refrigeration series, generators and other series.
1, honeycomb cooling tower filler in the inclined tube is mainly used for a variety of precipitation and desanding effect. Is nearly a decade in the water supply and drainage works in the most widely used and become a water treatment device. It has a wide range of applications, high processing effect, small footprint and so on. It is suitable for the new construction and the transformation of the existing old pool, and can achieve good economic benefits. It is suitable for the transformation of existing old water tanks.
2, oblique staggered filler .with advanced technology, reasonable design, reliable data, durable, after the test and production operation shows that the cooling effect is good, ventilation resistance is small, hydrophilic and strong contact area and other advantages. Oblique staggered packing with coil and screw assembly in two forms, the tilt angle is generally 60 degrees, mainly for round countercurrent cooling tower.
3, honeycomb cooling tower filler with laminar flow state is good, the particles are not disturbed by turbulence and other characteristics, and wet weeks, small hydraulic radius. It is resistant to acid, alkali and organic solvent. The
Through the comparison of honeycomb and oblique staggered cooling tower filler, we have found that they have the advantages. So that it can make their "best" can also make us better and more appropriate to use them!
For more information, please visit our website: www.coolingtowerfiller.com, or contact us with E-mail, our E-mail address is rask@coolingtowerfiller.com, you can also chat us straightly on whatsapp: 008618330029204
订阅:
博文评论 (Atom)
closed type cooling tower
new 1000*1300mm spindle cooling tower pvc fill pack Cooling Tower has roots inside the cooling tower industry that span again greater t...
-
new type Marley cooling tower pvc filler For the reason that cylinder chamber is open to the discharge manifold, no refrigerant gasoline c...
-
750 x 2000mm Kuken cooling tower pp filling Cooling towers are heat rejection devices. They are integral to many refrigeration programs in...
没有评论:
发表评论