What are the aspects of the cooling tower filler

Buy cooling tower filler to consider a lot of problems? Mainly the following eight aspects! The following let Hebei LongTime  Co., Ltd. to bring you a detailed introduction!
1, should be based on the type of cooling tower, cooling tasks, the quality of circulating cooling water; design operating conditions and other conditions, choose good stiffness, corrosion resistance, anti-aging, flame retardant performance of the cooling tower filler.
Countercurrent cooling towers should be made of thin film or drop film; cross-flow cooling tower of the film, drop film type, leaching filler and tower and other support height after the determination.
2, according to the water temperature T1 flame retardant (oxygen index 30 ~ 40), high temperature performance of different filler:
T1 ≤ 45 ℃, should choose polyvinyl chloride;

T1 ≤ 55 ℃, should be selected modified polyvinyl chloride;

T1 ≤ 60 ℃, should use polyester glass steel.
3, cold areas, packaging materials should be based on the minimum monthly average temperature in the cold, select the appropriate grade of filler, the minimum monthly mean temperature below 8 ℃ should choose cold type filler.
4, when the cooling water suspension is less than 20mg / L, should be packaged with thin film. When the suspension of suspended solids in more than 50mg / L, should be used drip or drip film filler.
5, cooling tower filler performance and thermal performance should be combined with the performance evaluation of the fan, in the same design conditions, cooling capacity selection. Film filler, when the same type of paper and the combination of high combination is different, should be calculated when the design temperature difference is large, should choose a larger one high.
6, when the filler block directly support the beam in the support of small, support beam should be small in width, structural and ventilation resistance is small, the beam spacing should be equipped with a simple support the optimal size of the pad. When the support grid plate, gate plate simply span and support beam span should be consistent, the corrosion resistance of the grid should be compatible with the filler.
7, when the cooling tower filler installation lift, should prevent the shaking measures filler.
8, with the form of cooling tower filler should be stable, easy construction and maintenance.
Optional cooling tower filler the most basic principle is based on their own business needs and the performance of the filler to a reasonable choice!
For more information, please visit our website: www.coolingtowerfiller.com, or contact us with E-mail, our E-mail address is rask@coolingtowerfiller.com, you can also chat us straightly on whatsapp: 008618330029204