The distribution of underground pipelines in the cooling water system has a number of factors affecting the capacity of the cooling tower water collecting pan. Therefore, some cooling tower fill manufacturers do not indicate the capacity of the cooling tower water collecting pan. Generally speaking, the piping of the cooling water system is arranged in the cooling Under the tower, the capacity of the water pan only needs to meet the normal water volume, but if the cooling tower water system pipe arrangement is higher than the cooling tower packing part, then part of the pipeline water should be collected near water The plate of the solution.
Usually there are two types of cooling tower filler should increase the capacity of the water tray, one is for the cross-flow tower, the water mains will layout in the cooling tower to the top; the other is the freezing room and cooling tower arranged in the same plane , Then a part of the pipeline will be higher than the cooling tower, the two cases under the pipeline water shortage should be included in the cooling tower water tray capacity
For more information, please visit our website: www.coolingtowerfiller.com, or contact us with E-mail, our E-mail address is rask@coolingtowerfiller.com, you can also chat us straightly on whatsapp: 008618330029204
订阅:
博文评论 (Atom)
closed type cooling tower
new 1000*1300mm spindle cooling tower pvc fill pack Cooling Tower has roots inside the cooling tower industry that span again greater t...

-
Vertical Flow cooling tower film fill media On the hybrid system, the winter heating interval is the worst situation for a unit to operat...
-
Cooling tower filler and deflector failure is one of the common problems in cooling tower operation.With the improvement of people's awareness of water conservation, cooling towers as a recycling water treatment equipment has been wid...
没有评论:
发表评论