Cold water tower cooling water cooler direct cooling machine in the electroplating (oxidation) industry cooling principle: cold water tower bottom basin water pump through the pump to the chiller of the condenser to cool the condenser, and then flow back Cooling tower sprayed down through the tower after the top of the fan on the water after the cooling back to the bottom of the cooling tower, so the cycle of the operation.
FRP cooling towers mainly by the motor, fan, cloth pipe, water distributor, packing and other components. Under normal circumstances, the ring cooling water through the pump to the cooling tower, FRP cooling tower cooling tower power, the motor driven high-speed rotating ring hit the ring cooling water, so that the water column "spray" effect, thereby reducing the temperature. A support base is mounted on the bottom of the unit, with a rotating sprinkler on the support base and a leaf on the rotating sprinkler.
Cooling Tower Vertical Fills
The circulating cooling water sent from the water pump enters the rotary sprinkler at a high speed, and the high-speed rotating sprinkler drives the windshield to rotate the wind and transforms into a plurality of slender small water columns. The wind produces convection to cool the cooling water. "In fact, the use of water thrust to promote the fan cooling, cooling water can be reduced from 42 degrees Celsius to 32 degrees C." FRP cooling This is a unique technology, because no motor, so that no power
S wave corrugated PVC cooling tower fill
For more information, please visit our website: www.coolingtowerfiller.com, or contact us with E-mail, our E-mail address is rask@coolingtowerfiller.com, you can also chat us straightly on whatsapp: 008618330029204, you can also call our boss straightly: 008615930159213
没有评论:
发表评论