Large - scale knowledge of cross - flow cooling tower packing

pvc cooling tower fill sheet
Cross - flow cooling tower packing standard size
The distance between the top of the cooling tower and the lower end of the fan should be 1.2 times the diameter of the fan.
Counter - current cooling tower packing standard angle
1. In the construction of counter-current cooling tower, the top of the filler and the air flow into the angle should be controlled within 90 degrees, the use of flat roof, under the guide, the collector and the air flow into the corner control in 90-120 Between degrees.
cooling tower pvc filling
2. Shrinkage of the top of the tower, the contraction of the roof angle should be controlled between 90-110 degrees.
3. Water filler inclination control between 5-8 degrees.
4. In the course of use, in order to prevent the air and the bottom of the filler to the surface of the short circuit, should be set up standby flow measures.
pp plastic heilex ring for Air Purification
For more information, please visit our website: www.coolingtowerfiller.com, or contact us with E-mail, our E-mail address is rask@coolingtowerfiller.com, you can also chat us straightly on whatsapp: 008618330029204, you can also call our boss straightly: 008615930159213