What is the technical standard of the s-wave cooling tower packing

pvc fills of cooling tower
  S-wave cooling tower packing is set in the cooling tower, so that the water and space have full contact with a hot, qualitative surface of the filling material, the filler from the large, light weight per unit volume, can prevent the blockage of pollutants. Water contact area, long process, horizontal diffusion ability, so that the distribution of water film more uniform. Assembly of ligh
t weight, high load strength. Xiaobian today to tell you about the technical requirements of the filler, as long as there is a certain filler requirements.
width 380mm bac counter flow cooling tower pvc fill
  Circulating water in the cooling tower in the heat exchange process, mainly in the s wave packing carried out, the quality of the filler directly affect the long-term operation of the power plant safety and economy. In order to ensure that PVC (PVC) plastic water filler manufacturing, construction and installation of the quality, specially formulated this provision. The plate structure of the cooling tower packing must be tested by the relevant scientific research design unit and approved by the competent professional unit to carry out the production and use. Cooling tower packing made of polyvinyl chloride plastic sheet, to meet the following production requirements:
splash fill for cooling tower
(1) Geometric deformation does not occur at 65 ° C.
(2) in the design of the minimum temperature conditions are not broken, not brittle.
(3) in the normal operation, the use of conditions under the life of not less than 20a.
(4) has good flame retardant properties.
pvc cooling tower fill sheet
For more information, please visit our website: www.coolingtowerfiller.com, or contact us with E-mail, our E-mail address is ann@longtimefrp.com, you can also chat us straightly on whatsapp: 008618330029204, you can also call our boss straightly: 008615930159213