What are the characteristics of the cooling tower parts

Cooling Tower Parts - Cooling Tower Turbine:
  Cooling tower turbine using turbocharged water wheel technology, the use of cooling tower equipment, the original circulating cooling water to promote the fan cooling, abolition in the traditional cooling tower with the motor drive fan cooling, eliminating the mechanical slowdown and motor, in order to achieve " Zero "energy consumption of new energy-saving environment-friendly cooling tower.
  Cooling tower cooling system is the cooling water from the cooling pump according to the system requirements with a specific water pressure, water flow to the cooling tower for heat exchange, so after the tower after the water and residual pressure, can be fully utilized. Complete the cooling tower to run the cooling water in accordance with a certain pressure, the flow through the turbine group, so that it can get the output power, and drive the fan cooling, completely eliminating the fan motor, 100% to eliminate the purpose of fan power.
  When the turbine is installed, it can keep the original cooling tower exterior structure, the size does not change, the cooling efficiency of the turbine cooling tower, the wind speed of the fan, the ratio of gas to water and the noise are improved to different extent than the original motor drive fan cooling tower. Technical indicators can meet the cooling tower design requirements.
  The use of turbine cooling tower system failure point to a turbine instead of motor, reducer and transmission part, can achieve long trouble-free operation for the use of units to save a lot of maintenance and replacement of the cooling tower motor and reducer costs and Manpower.
Cooling tower parts Category:
 Cooling tower parts can be divided into two categories: standard parts and optional parts.
 Standard parts are supplied with optional parts. Although the models of the standard configuration are not the same, the common standard configuration components are memory and paper feed boxes. Of course, for different models, the size of the memory and the capacity of the paper tray is different. The standard configuration can be found by referring to the product description. If the lack of standard configuration, then, to a certain extent, will affect the use of products and performance.
  Optional parts refer to components that can enhance product functionality and improve product performance outside of the standard configuration and require additional purchase. Unlike standard configurations, the use of optional parts does not affect the use of the basic functions of the product. There are many types of optional parts, different products to support the optional products are different, so in the optional optional parts should be consulted in advance of the product description, so as not to buy can not be used.
For more information, please visit our website: www.coolingtowerfiller.com, or contact us with E-mail, our E-mail address is rask@coolingtowerfiller.com, you can also chat us straightly on whatsapp: 008618330029204