Water cooling tower

Introductions:
1. Spray one of: WGPL cooling tower structures structures on cooling differences:
WGPL GPL efficient low pressure spraying device for lathe instead of traditional PVC packaging, cooling of components of resistance has gone from 90-110Pa to 30PaWGPL turn with consequent jet process cooling with downstream and upstream processes, Floating of: WGPL tours using special technology, without drifting water.
2. Cooling spray mechanism one: WGPL cooling tower:
Cooling tower of three main elements:
Air and water ratio (air / water ratio), cold air in contact with the surface of the water; Contact time to cold air and water.
Tour of: WGPL design relies on the above three elements.
Resistance: WGPL turns from 140Pa filmy to 75Pa, air cooling axial fans flow increases by 20%, packed column increased by 20% above water;
Tower of: WGPL by low pressure spray droplets effective LPG injection of water in 0.5 to 1 mm of 0.03MPa, water gas contact 10% larger than the surface and a distribution of water on the PVC packaging;
: WGPL bedding spray, both downstream and upstream of cooling processes, cooling time plus packaging.
3. Advantages: WGPL spray, cooling tower
Performance :
Temperature as packed 2 turn c, YOY 10% cooling water, cold piece T2-τ ≤ 3.5, smaller than cooling tower package
Surgery :
Totally overcome aging packaging, deformation, brittle, jam, gully debris flow and filling phenomena for process equipment
And blocked pipes, distributed water in the tower, block spray. Reliable operation
Energy saving :
: WGPL resistance 50%, fan energy efficient 35%
For more information, please visit our website: www.coolingtowerfiller.com, or contact us with E-mail, our E-mail address is rask@coolingtowerfiller.com, you can also chat us straightly on whatsapp: 008618330029204