two cleaning methods for cooling tower filler

Cooling tower filler cleaning method (a):
Manual cleaning of the cooling tower falling off the dirt;
Repeatedly rinse the filler with a high pressure water gun, remove the sludge scale under the cleaning;
With about 50 ℃ hot water TNB safe and efficient cleaning agent dissolved with a rinse pump repeatedly washed until the scale rinse (if the filler is used for a long period of time, causing aging and collapse, it is recommended to replace the filler), while adding sterilization algae , Completely kill biological algae and bacteria;
To confirm that all the systems are cleaned and drained;
Rinse the filler with water and inside and outside the tower;
Restore the system everywhere, replenishme
nt can be used;
After all the recovery, please Party A management acceptance;
Evacuation of Party B items, cleaning the scene of health;
Duration: according to the actual situation set.
Cooling tower filler cleaning method (2):
1, temporary use of plastic cloth to build a large pool;
2, the cleaning agent added to the water;
3, the filler removed from the cooling tower into the pot soak;
4, will be soaked in clean water filled with water rinse back to the cooling tower;
5, with a sticky cloth placed in the cooling tower on the sink, the sink mouth soaked to clear;
6, with the same method to clean the cooling tower chassis scale clean;
7, with water rinse filler and inside and outside the tower;
8, restore the system everywhere, replenishment can be used;
9, duration: according to the actual situation set.
For more information, please visit our website: www.coolingtowerfiller.com, or contact us with E-mail, our E-mail address is rask@coolingtowerfiller.com, you can also chat us straightly on whatsapp: 008618330029204