The flow path of the mesh filler uses a regular vertical runner and a smooth surface design and determines the different runner specifications depending on the solution medium (solution viscosity and suspended solids content), so that the gas and liquid phases are in the packing layer , Can be ordered and uniform distribution. At the same time to solve the solid material in the filler surface deposition, the physical method to alleviate the filler jam phenomenon.
Grid fills with polypropylene or reinforced polypropylene as the material, with injection molding a way injection molding. It not only has good structural stability, corrosion resistance, while the accumulation of heavy packing and other grille-type filler is much lighter. WG-1 ~ WG-5 five kinds of grid packing accumulation of serious weight of 123kg / m3 ~ 81kg / m3. The specific surface area is an important parameter of the filler, which is a key parameter affecting the mass transfer efficiency. WG-1 ~ WG-5 five kinds of grid filler specific surface area of 147m2 / m3 ~ 81m2 / m3. Porosity is an important parameter that affects the ability of gas and liquid to pass through the packing layer. The larger void ratio can effectively reduce the resistance of the packing layer. It is worth mentioning that the structure of the special mesh packing its packing layer holding capacity dropped significantly, packing tower "liquid pan" speed greatly improved. WG-1 ~ WG-5 five kinds of grid filler porosity of 87% to 91%.
The fills capacity is large, the pressure is low and the anti-blocking performance is strong. It is suitable for gas-liquid mass transfer, absorption, washing and other chemical processes with operating temperature less than 60 ℃, such as wet desulfurization and dust removal.
For more information, please visit our website: www.coolingtowerfiller.com, or contact us with E-mail, our E-mail address is rask@coolingtowerfiller.com, you can also chat us straightly on whatsapp: 008618330029204
没有评论:
发表评论