Oblique wave FRP cooling tower filler

Oblique wave FRP cooling tower filler one of the key points is to pay attention to quality. The oblique staggered filler is made of two types: coil material and screw assembly. The inclination angle is generally 60 degree oblique staggered packing with advanced technology, reasonable design, reliable data and durable. After test and production operation, it shows that the cooling effect is good and the ventilation resistance is small. Water performance, contact area and other advantages.
Oblique wave FRP cooling tower filler optional two points, that is, the filler structure. Fill the two sides with a bump on the point of the wave plate, through the installation of the point wave plate into a whole, to improve the rigidity. As the bumps on both sides to avoid the opportunity under the water droplets to improve the use of the formation of water film, fill the tail with water collection measures.
Oblique wave FRP cooling tower filler to buy the third point, the use of filler effect. Taking into account the ease of assembly, the cooling tower of the alumni seat placed in the strip of reinforced concrete. The base dimensions in the samples are for reference only and the averages of the pedestals are averaged. Anchor bolts can be embedded 200 × 200mm thick 16mm steel plate, if the user wants to increase the storage capacity of the tank, can order instructions
For more information, please visit our website: www.coolingtowerfiller.com, or contact us with E-mail, our E-mail address is rask@coolingtowerfiller.com, you can also chat us straightly on whatsapp: 008618330029204