Introduction to the filler

The water collecting device is composed of a group of retaining panels, and the retaining plate is a five-fold flaky structure. The two sides of the flap are provided with corresponding flaps and Groove, the two sides of the retaining plate is also equipped with ribs, when used, each block of the flap into the corresponding groove is a combination of a group of water collectors, the collection The water heater is placed in the cooling device, which can make the hot air of the cooling device go out smoothly, but also increase the contact surface area of ​​the hot air and the waterproof plate, the water effect is good, the water loss is small, and the floating phenomenon can be effectively reduced.
The filler is mainly suitable for large and medium-sized natural ventilation cooling tower and mechanical ventilation cooling tower. It can reduce the cooling tower discharge hot and humid air entrain a large number of small drops of water drift, to avoid the surrounding environment pollution. According to the determination of the cooling tower installed after the addition of water, the water spray rate (that is, wind loss) by the installer when the 0.1% (accounting for circulating water) down to 0.05%, but the water cooler Obviously affected.
When the ultra-near wind speed of the filler is less than 3.0 m / s, the general equipment is used. When the wind speed is greater than 3.2 m / s, it should be considered to set the second-class trench.
Water collector model
Waves 160-45, waves 1750-50, HC-130-50, HU-50/270 B160-35, B160-45, 160-45. B160-50
At present, these types of water collectors have been widely used in domestic thermal power plants, steel plants, petrochemical plants and other industrial sectors of mechanical ventilation and natural ventilation cooling towers, the practice proved that the water level of advanced design, the effect is significant, Reliable, easy to install, long service life.
For more information, please visit our website: www.coolingtowerfiller.com, or contact us with E-mail, our E-mail address is rask@coolingtowerfiller.com, you can also chat us straightly on whatsapp: 008618330029204