How to clean the cooling tower

The cooling tower is a device that uses water as a circulating coolant to absorb heat from the system to reduce the water temperature from a system. The cold is the use of water and air flow contact after the cold and heat exchange to produce steam, steam volatilization Take away the heat to evaporate heat, convection heat transfer and radiation heat transfer and other principles to disperse the industrial or refrigeration air conditioning generated by the waste heat to reduce the water temperature of the evaporative cooling device to ensure the normal operation of the system, the device is generally barrel Called cooling tower.
     Cooling tower is a comprehensive product integrating aerodynamics, thermodynamics, fluid science, chemistry, biochemistry, materials science, static, dynamic structural mechanics, processing technology and other disciplines. Water quality is a multivariable function, and cooling is a multi-factor, multivariable and multi-effect synthesis process. The following is about the cooling tower cleaning method:
     Most of the cooling water contains calcium, magnesium and acid carbonates. When the cooling water flows through the metal surface, there is the formation of carbonate. In addition, the dissolved oxygen in the cooling water will cause corrosion of metal, the formation of rust. Due to the generation of rust, the cooling effect of the cooling tower is reduced. Serious when the shell had to spray cooling water, serious scaling will block the tube, so that the heat loss effect. The data show that scale deposits have a significant effect on heat loss, and as the sediment increases, energy costs increase. Even a thin layer of scale will increase the fouling part of the equipment more than 40% operating costs. Keep the cooling channels free of mineral deposits can improve efficiency, save energy, extend equipment life, while saving production time and costs.
     For many years, traditional cleaning methods such as mechanical methods (high pressure water, chemical cleaning (pickling), etc.) have a lot of problems in cleaning the equipment: can not completely remove scale and other sediments, acid corrosion caused by the formation of equipment loopholes , The residual acid on the material secondary corrosion or scale corrosion, eventually leading to the replacement of equipment, in addition, cleaning waste water toxic, requires a lot of money for wastewater treatment. In view of the above situation, domestic and international efforts to develop a small metal corrosion of the cleaning agent, and the current successful research and development of the blessing of Tektronix cleaning agent. Its high efficiency, environmental protection, safety, no corrosion characteristics, not only the cleaning effect is good and no corrosion of the equipment, to ensure the long-term use of cooling towers.
For more information, please visit our website: www.coolingtowerfiller.com, or contact us with E-mail, our E-mail address is rask@coolingtowerfiller.com, you can also chat us straightly on whatsapp: 008618330029204