Flame retardant cooling tower filler

1, by the anti-ultraviolet, anti-chemical corrosion of high-quality modified P.V.C sheet by the automatic vacuum plastic, its performance in line with NDG88-89 "plastic leaching filler technical requirements." Unique crossed double groove (CROSS DOUBLEFLUTED) ripple design, good hydrophilicity, so that hot water through the cooling tower filler surface when the formation of thin water film, water and air contact more fully, thereby enhancing the heat exchange performance, improve the cooling tower Of the cooling efficiency.
2, the cooling tower filler flame retardant performance, the detection of filler oxygen index of 38, much higher than the national standard requirements ≥ 28.
3, pouring pouring pour "V" -shaped design, into a block to install the tower in the installation mode, to avoid the packing due to fouling caused by pressure deformation; assembly of the filler has a cooling, the dual effect of water , Large from the structure to ensure that the filler is not blocked, both to reduce the wind resistance, but also reduce the chance of biological derivatives.
4, large "honeycomb" structural design has a diversion effect, has a good uniform wind effect, improve and stabilize the water vapor heat exchange strength, precise positioning and other spacing combination, easy and water flow through the surface to form a large area of ​​the flow Water film, promote water vapor exchange.
Unique water structure: the use of high-quality PVC material thermoplastic molding, in the domestic industry in a leading level, the effective hot and humid air from the water back to the tower, greatly reducing the loss of water, reducing the supply Water of water. LKN series cooling tower water loss rate of less than 0.001%.
Variety Nozzle: Sink system uses the latest technology to introduce the nozzle of the United States as the main components, the nozzle selection of high quality modified P.P. injection molding, the internal non-moving parts, corrosion resistance, aging resistance. Work low energy consumption, large diameter is not easy to plug, scaling, demolition, installation, easy maintenance. Unique variable diameter design, so that continuous distribution of water, the formation of a reliable "no hollow" umbrella-shaped "solid cone" sowing mode, no water without dead ends. Hot water evenly spread on the filler surface, effectively improving the heat exchange efficiency. Inside the round of the foreign design, not easy to plug, no cleaning, reducing the maintenance of the workload.
For more information, please visit our website: www.coolingtowerfiller.com, or contact us with E-mail, our E-mail address is rask@coolingtowerfiller.com, you can also chat us straightly on whatsapp: 008618330029204