Inclined pipe is used to remove the sediment in the water supply and drainage works by using the porous precipitate. The treatment of the industrial and domestic water, the sedimentation of the sewage, the separation of the oil and the tailings are very good and can be used for the filter. Characterized by wet weeks, small hydraulic radius, laminar flow state is good, the particles are not disturbed by flocculation.
Straight tube for high load biofilter, tower, submerged biofilter and biological turntable microbial body, the urban sewage and industrial organic wastewater treatment. It is characterized by small footprint, good treatment effect, low aeration strength, no sludge return.
Second, the filter head (backwashing filter): filter is the bottom of the filter system water softener backwashing device, it can effectively rinse the sludge in the filter sludge to ensure the normal operation of the water quality of the filter; The type of filter are (long, short handle) mushroom type, plum type, tower type and cylindrical type, are made of ABS plastic, reasonable structure, strong connection, high pressure strength, gap unchanged, There is no dead water angle between the board, no mud, the effect is good, (per hour displacement) 0.25 tons, 0.5 tons, 1 ton. Long-handled filter head is often used in filter water soft water backwashing water distribution system; short handle filter head used in single water backwashing and gravity, pressure filter and ion exchange filter bed and other water treatment equipment filter device.
Three, multi-faceted hollow ball: made of polypropylene plastic packing with multi-faceted hollow ball, ladder ring, Pall ring, liquid cover ball and other products for power, chemical, paper, environmental protection and other industries decarbonization Degreasing, decarbonization, oil-water separation, desalination, pure water, wastewater treatment and other devices used in the device, with high speed, leaves, resistance, small overall surface area, high temperature, corrosion resistance, good surface hydrophilicity , Low spray density characteristics.
Four, semi-soft filler: semi-soft filler made of polymer, a strong cloth again water, cloth capacity. Long-term use is not deformed, easy to hang film, stripping. The falling biofilm is finely divided and the packing is not easily clogged. Resistant to corrosion, biodegradable. Unit diameter general ¢ 120, ¢ 150, the center rope with plastic rope and fiber rope, specifications can be based on the design department and user requirements.
Fifth, the combination of filler:
The composite filler is another type of filler that is improved on the basis of a soft filler, consisting of a fiber bundle, a plastic ring, a sleeve, and a center rope. Fiber bundles in the middle of the plastic ring under the support of the fiber bundle to avoid the center of the phenomenon, while to play a good cloth water, the role of gas, contact with good mass transfer conditions, high utilization of oxygen. Packing unit diameter: ¢ 120mm ¢ 150mm ¢ 200mm
Six, three-dimensional elastic filler: three-dimensional elastic filler material selection of polyolefin, with corrosion-resistant, high temperature, anti-aging high-quality plastic filler, the product long life, good oxygen performance. Due to the special structure of the filament, the surface area after the film is doubled, and the film is easy to be peeled off and the biofilm is strong. High temperature load impact, the treatment effect is remarkable, easy operation and management, no clogging, no knot. In different water quality engineering applications, adjustable wire thickness of the assembly form, fully applicable to all kinds of wastewater anaerobic, aerobic, aerobic and other treatment process.
For more information, please visit our website: www.coolingtowerfiller.com, or contact us with E-mail, our E-mail address is rask@coolingtowerfiller.com, you can also chat us straightly on whatsapp: 008618330029204
没有评论:
发表评论