Cooling tower repair need attention to the details

FRP cooling tower corrosion resistance, high strength, light weight, small size, small footprint, beautiful and durable, and transport, installation and maintenance are more convenient. Which is widely used in various sectors of the national economy, air conditioning, refrigeration, air pressure stations, heating furnace and condensing process cooling water circulation system is particularly appropriate. 1, round countercurrent FRP cooling tower. using counter-flow gas heat exchange technology, packing with high-quality modified polychloride plate to spread the area of ​​water; by rotating the water way to achieve uniform distribution of water and enhance the cooling effect. I have this series of products on the shape of the design made some improvements to make it more reliable, durable, easy assembly.
    Structure
    1) tower: reasonable line, smooth air, good quality, colorful, surface gel coat resin contains anti-UV agent, anti-aging, high strength, light weight, corrosion resistance. Anqiu Weihe FRP. Under the tower by the order requirements, can be equipped with overflow, sewage, automatic water supply, which can be directly from the water, eliminating the cooling pool, equipped with anti-noise muffler pad, effectively reducing the sound of dripping.
    (2) filler: the use of modified PVC wave plate, horizontal increase the ribs, water redistribution ability, resistance, heat performance, high temperature 70 degrees, low temperature -50 degrees, good flame retardant.
    (3) rotating water distributor and water pipes: with stainless steel ball bearings, flexible and reliable operation, low head, cloth water evenly, the use of aluminum or glass steel pipe made of water pipes, pipe installed on the water board, to overcome the water phenomenon.
    (4) Fan: Tsinghua University Department of Engineering Mechanics According to the series of cooling tower parameters designed low noise, high efficiency fan, aluminum alloy wing or FRP blade, the noise is small, high efficiency.
    (5) Motor: Tsinghua University Department of Electrical Engineering in the Y-series installation on the basis of size, designed for the cooling tower low-noise energy-saving motor, sealed waterproof performance, high temperature, high efficiency, low noise.
    (6) deceleration device: the use of polyester fiber reinforced chloroprene rubber power belt drive, high temperature, high efficiency, water does not stretch, to overcome the slippery phenomenon, the noise is very small.
    (7) sound absorption facilities: ultra-low noise-type cooling tower in the air inlet with a sound-absorbing material to increase the shield, and in the upper and lower two with a suction barrier to achieve the maximum noise reduction effect. Anqiu Weihe FRP internal data. In the upper tower outlet installed with a sound-absorbing material of the trumpet shield and suction barrier, reducing the fan and the motor came out of the noise.
    (8) into the wind: with glass fiber reinforced plastic louvers, reduce the floating water, air resistance is small, especially for the northern region and the need to use the cooling tower units throughout the year.
    (9) bracket: all fans, fillers, into the wind, towers and other steel stent for the assembly, galvanized or painted anti-corrosion. Fasteners are made of galvanized or stainless steel bolts. 2, square cross-flow cooling tower This series of cross-flow FRP cooling tower with both sides of the wind, by the top of the fan, the air through the tower on both sides of the filler, and hot water for media exchange, hot and humid air and then row to the tower. Fill the two sides with bumps on the point of the wave plate, through the installation of the head so that the wave plate into a whole, in order to improve the rigidity of the bumps on both sides can also avoid direct dripping, thus improving the water film forming capacity, Water measures.
    Product Features:
    1, save space, light structure
    The heat transfer area designed for this series of cooling towers has greatly improved the heat transfer area. Compared with the original HBLD series and the original HBLCD series, the area of ​​the HBLCD has been greatly reduced. Due to the structural design optimization and the use of steel structure , Running weight is also greatly reduced. 2, save electricity
    The use of small ventilation ducts and Tsinghua University designed specifically for the cooling tower design of the wing-type FRP efficient fan, thereby reducing the motor power used, ultra-low noise type motor power is smaller, more power, but also According to the user's request, equipped with two-speed motor to save electricity.
    3, running noise is very low
    A low-noise, low-noise axial fan with FRP material designed for cooling towers and a low-noise motor designed specifically for cooling towers are designed with Tsinghua University, which reduces the operating noise of the cooling tower. Ultra-low noise series cooling tower operating noise is lower, fully meet the environmental requirements. If equipped with two-speed motor, low-speed operation at night, but also make the noise down 2-3dB (A), the user needs two-speed motor should be made separately when ordering requirements.
    4, good corrosion resistance
    The tower body, sink and the panel are used with good corrosion resistance of FRP material, and in the gel coat resin with light stabilizer, has a good anti-aging properties, durable color. Anqiu Weihe FRP. The steel structure of the tower body is galvanized after processing to improve the corrosion resistance of the cooling tower. Under normal service life, no other anticorrosive is needed.
    5, convenient combination
    Can be combined to meet the requirements of different conditions, the user can also be based on the venue to determine the combination, and according to the user's building characteristics, adjust the appearance of the cooling tower. Such as the user site is very limited. I can also be designed for the user's special requirements to meet the user's thermal performance and noise requirements.
    6, easy maintenance
    This series of cooling towers for the modular design, adjacent cooling tower air chamber separated from each other, in the normal operation of the cooling tower under the premise of maintenance and repair, cleaning fillers, water pipes and water tank work more convenient.
    product structure:
    (1) Panel: FRP material, the surface smooth and beautiful, corrosion-resistant, anti-aging.
    (2) filler: for the modified PVC two-way wave plate, thermal performance, airflow resistance, good rigidity, heat 75 ℃, cold, flame retardant.
    3) fan: blade material for the aluminum alloy. Wind turbine aerodynamic reasonable, large air volume, high efficiency, low noise, corrosion resistance and so on.
    (4) motor and reducer: for the Association equipment.
    5) cloth sink: FRP material, water distribution evenly, ultra-low noise type cover can be shielded light, anti-debris flying, reducing splash sound. Anqiu Weihe FRP
    (6) muffler: fiberglass material, viscous cavity type flame retardant PVC film muffler material.
    (7) blinds: fiberglass material, can be spilled water, and can make the tower into the air evenly.
    8) Water tank: FRP material, from the role of water, with automatic water facilities, closed-loop direct water absorption.
    (9) skeleton: for the folding steel assembly structure, good rigidity, light weight, transport, easy installation, hot galvanized corrosion.
For more information, please visit our website: www.coolingtowerfiller.com, or contact us with E-mail, our E-mail address is rask@coolingtowerfiller.com, you can also chat us straightly on whatsapp: 008618330029204