Cooling tower filler - countercurrent cooling tower filler standard angle

Cooling tower in the industrial production as the main core of circulating water heat, in China's industrial production in the impact of China's industrial production costs and efficiency. Cooling tower in the industrial production inappropriate use, it will cause the equipment is not timely cooling, production stagnation, the water temperature is too high and so on. Cooling tower packing is the main factor of ** hydrothermal cycle, therefore, to choose ** cooling tower packing.
Cross - flow cooling tower packing standard size
The distance between the top of the cooling tower and the lower end of the fan should be 1.2 times the diameter of the fan.
Counter - current cooling tower packing standard angle
1. In the construction of counter-current cooling tower, the top of the filler and the air flow into the angle should be controlled within 90 degrees, the use of flat roof, under the diversion ring, the collector and the air flow into the corner control in the 90-120 Between degrees.
2. Shrinkage of the top of the cooling tower, the contraction of the cover of the top angle should be controlled between 90-110 degrees.
3. Water filler inclination control between 5-8 degrees.
4. In the course of the use, in order to prevent the air and the bottom of the filler to the surface of the short circuit, should be set aside the flow of spare measures.
For more information, please visit our website: www.coolingtowerfiller.com, or contact us with E-mail, our E-mail address is rask@coolingtowerfiller.com, you can also chat us straightly on whatsapp: 008618330029204