Cooling tower box packing two kinds of cleaning methods

How to clean the tower filler How to clean? Here are two ways
Cooling tower box packing cleaning method (a):
The use of high-pressure water gun repeatedly rinse the filler, cleaning the sludge scale, etc .; with about 50 ℃ hot water will TNB safety ** detergent dissolved with a rinse pump after repeated rinse the filler until the scale Rinse clean (if the filler is used for a long period of time, causing aging and collapse, it is recommended to replace the filler), while adding ** algicide, ** kill biological algae and bacteria; confirm the system all clean, With the water rinse the filler and the tower inside and outside; recovery system everywhere, replenishment can be used; all recovered, please Party A management personnel acceptance; evacuation of B items, cleaning the scene health; duration: according to the actual situation.
Cold and cooling tower filler method (2):
1, the temporary use of plastic cloth to build a large pool; 2, the cleaning agent added to the water; 3, the filler removed from the cooling tower into the pot soak; 4, soaked in clean water filled with water after washing Back to the cooling tower; 5, with a sticky cloth on the cooling tower sink, the sink mouth soak the dredge; 6, with the same method will be cooling tower chassis scale clean; 7, rinse with water and packing Inside and outside; 8, restore the system everywhere, replenishment can be used; 9, duration: according to the actual situation.
For more information, please visit our website: www.coolingtowerfiller.com, or contact us with E-mail, our E-mail address is rask@coolingtowerfiller.com, you can also chat us straightly on whatsapp: 008618330029204