It is well known that the cooling tower performance is reduced because of the large amount of dirt in the filler, so that the filler can not form a water film, but the formation of a small stream of water, a serious impact on the air and water heat exchange, resulting in cooling towers Performance significantly reduced, so that the temperature of the water is still very high. Due to the low performance of the cooling tower, the change of the ambient temperature becomes the decisive factor of the temperature of the effluent, and the water temperature changes with the change of the ambient temperature, which is why the water temperature is unstable.
Although the replacement of the cooling tower packing is the solution to the problem, but in order to save costs and the next time to replace the cooling tower packing difficulties, we use the S-wave cooling tower filler.
S-wave cooling tower packing durable, corrosion-resistant and difficult to deformation, and my company through several tests and production operations proved S-wave cooling tower filler chemical stability, but also has acid, alkali and other advantages.
However, in use should also be careful to be placed in the form of staggered, so as to better produce heat and resistance, or once the cooling tower packing blockage is serious, not only clean up more difficult, even need to replace the overall cooling tower packing, so Will only increase the cost, so in the future use of the process must pay more attention.
没有评论:
发表评论